Página 1 de 3 123 ÚltimoÚltimo
Resultados 1 al 10 de 23

Tema: Ayuda Modo BARO Betaflght

  1. #1
    Nuevo Usuario
    Fecha de ingreso
    04 jun, 18
    Ubicación
    Berga
    Mensajes
    16

    Question Ayuda Modo BARO Betaflght

    Hola a todo@s soy novato en esto y tengo un problema con el betaflight, me detecta el barometro pero cuando activo modo BARO y le adjudico un canal y un rango no se me activa, es decir no se pone la pestaña de la izquierda naranja , los modos ARM, ANGLE, HORIZON BUZER ETC... Si se pone naranja
    Perdonad las molestias y gracias.

  2. #2
    Avatar de starcopter
    Fecha de ingreso
    28 jul, 12
    Ubicación
    Barcelona
    Mensajes
    9,628
    Cita Iniciado por Xysky Ver mensaje
    Hola a todo@s soy novato en esto y tengo un problema con el betaflight, me detecta el barometro pero cuando activo modo BARO y le adjudico un canal y un rango no se me activa, es decir no se pone la pestaña de la izquierda naranja , los modos ARM, ANGLE, HORIZON BUZER ETC... Si se pone naranja
    Perdonad las molestias y gracias.
    Hola Xysky,

    Pero, has activado el uso del barómetro en la configuración básica?

    Y es que no es suficiente activarlo por canal, tiene que estar activo en la configuración.

    Saludos!

  3. #3
    Nuevo Usuario
    Fecha de ingreso
    04 jun, 18
    Ubicación
    Berga
    Mensajes
    16
    Si, si el barometro esta activado, sino no sale el modo BARO.

  4. #4
    Nuevo Usuario
    Fecha de ingreso
    04 jun, 18
    Ubicación
    Berga
    Mensajes
    16
    De todas formas gracias por la ayuda.

  5. #5
    Avatar de starcopter
    Fecha de ingreso
    28 jul, 12
    Ubicación
    Barcelona
    Mensajes
    9,628
    Has comprobado haciendo un “dump” en CLI que efectivamente te sale activado?

    (Probando)

    Saludos!

  6. #6
    Nuevo Usuario
    Fecha de ingreso
    04 jun, 18
    Ubicación
    Berga
    Mensajes
    16
    Que es dump y como se hace, perdona pero es que soy muy novato.
    gracias i salu2

  7. #7
    Nuevo Usuario
    Fecha de ingreso
    04 jun, 18
    Ubicación
    Berga
    Mensajes
    16
    He mirado por internet y creo que he echo un dump.
    Ahora hago un copy paste.

    dump
    # Betaflight / SPRACINGF3 (SRF3) 3.3.2 May 4 2018 / 10:02:58 (64a292f37) MSP API: 1.38
    name -
    resource BEEPER 1 C15
    resource MOTOR 1 A06
    resource MOTOR 2 A07
    resource MOTOR 3 A11
    resource MOTOR 4 A12
    resource MOTOR 5 B08
    resource MOTOR 6 B09
    resource MOTOR 7 A02
    resource MOTOR 8 A03
    resource SERVO 1 NONE
    resource SERVO 2 NONE
    resource SERVO 3 NONE
    resource SERVO 4 NONE
    resource SERVO 5 NONE
    resource SERVO 6 NONE
    resource SERVO 7 NONE
    resource SERVO 8 NONE
    resource PPM 1 A00
    resource PWM 1 A00
    resource PWM 2 A01
    resource PWM 3 B11
    resource PWM 4 B10
    resource PWM 5 B04
    resource PWM 6 B05
    resource PWM 7 B00
    resource PWM 8 B01
    resource SONAR_TRIGGER 1 B00
    resource SONAR_ECHO 1 B01
    resource LED_STRIP 1 A08
    resource SERIAL_TX 1 A09
    resource SERIAL_TX 2 A14
    resource SERIAL_TX 3 B10
    resource SERIAL_TX 4 NONE
    resource SERIAL_TX 5 NONE
    resource SERIAL_TX 6 NONE
    resource SERIAL_TX 7 NONE
    resource SERIAL_TX 8 NONE
    resource SERIAL_TX 9 NONE
    resource SERIAL_TX 10 NONE
    resource SERIAL_TX 11 B05
    resource SERIAL_TX 12 B01
    resource SERIAL_RX 1 A10
    resource SERIAL_RX 2 A15
    resource SERIAL_RX 3 B11
    resource SERIAL_RX 4 NONE
    resource SERIAL_RX 5 NONE
    resource SERIAL_RX 6 NONE
    resource SERIAL_RX 7 NONE
    resource SERIAL_RX 8 NONE
    resource SERIAL_RX 9 NONE
    resource SERIAL_RX 10 NONE
    resource SERIAL_RX 11 B04
    resource SERIAL_RX 12 B00
    resource I2C_SCL 1 B06
    resource I2C_SCL 2 NONE
    resource I2C_SDA 1 B07
    resource I2C_SDA 2 NONE
    resource LED 1 B03
    resource LED 2 NONE
    resource LED 3 NONE
    resource RX_BIND 1 NONE
    resource RX_BIND_PLUG 1 NONE
    resource SPI_SCK 1 NONE
    resource SPI_SCK 2 B13
    resource SPI_SCK 3 NONE
    resource SPI_MISO 1 NONE
    resource SPI_MISO 2 B14
    resource SPI_MISO 3 NONE
    resource SPI_MOSI 1 NONE
    resource SPI_MOSI 2 B15
    resource SPI_MOSI 3 NONE
    resource ESCSERIAL 1 A00
    resource CAMERA_CONTROL 1 NONE
    resource ADC_BATT 1 A04
    resource ADC_RSSI 1 B02
    resource ADC_CURR 1 A05
    resource ADC_EXT 1 NONE
    resource BARO_CS 1 NONE
    resource COMPASS_CS 1 NONE
    resource PINIO 1 NONE
    resource PINIO 2 NONE
    resource PINIO 3 NONE
    resource PINIO 4 NONE
    mixer QUADX

    mmix reset

    servo 0 1000 2000 1500 100 -1
    servo 1 1000 2000 1500 100 -1
    servo 2 1000 2000 1500 100 -1
    servo 3 1000 2000 1500 100 -1
    servo 4 1000 2000 1500 100 -1
    servo 5 1000 2000 1500 100 -1
    servo 6 1000 2000 1500 100 -1
    servo 7 1000 2000 1500 100 -1
    smix reset


    feature -RX_PPM
    feature -INFLIGHT_ACC_CAL
    feature -RX_SERIAL
    feature -MOTOR_STOP
    feature -SERVO_TILT
    feature -SOFTSERIAL
    feature -GPS
    feature -RANGEFINDER
    feature -TELEMETRY
    feature -3D
    feature -RX_PARALLEL_PWM
    feature -RX_MSP
    feature -RSSI_ADC
    feature -LED_STRIP
    feature -DISPLAY
    feature -OSD
    feature -CHANNEL_FORWARDING
    feature -TRANSPONDER
    feature -AIRMODE
    feature -RX_SPI
    feature -SOFTSPI
    feature -ESC_SENSOR
    feature -ANTI_GRAVITY
    feature -DYNAMIC_FILTER
    feature RX_SERIAL
    feature TELEMETRY
    feature RSSI_ADC
    feature OSD
    beeper GYRO_CALIBRATED
    beeper RX_LOST
    beeper RX_LOST_LANDING
    beeper DISARMING
    beeper ARMING
    beeper ARMING_GPS_FIX
    beeper BAT_CRIT_LOW
    beeper BAT_LOW
    beeper GPS_STATUS
    beeper RX_SET
    beeper ACC_CALIBRATION
    beeper ACC_CALIBRATION_FAIL
    beeper READY_BEEP
    beeper MULTI_BEEPS
    beeper DISARM_REPEAT
    beeper ARMED
    beeper SYSTEM_INIT
    beeper ON_USB
    beeper BLACKBOX_ERASE
    beeper CRASH FLIP
    beeper CAM_CONNECTION_OPEN
    beeper CAM_CONNECTION_CLOSED
    map AETR1234
    serial 0 1 115200 57600 0 115200
    serial 1 0 115200 57600 0 115200
    serial 2 64 115200 57600 0 115200
    led 0 0,0::C:0
    led 1 0,0::C:0
    led 2 0,0::C:0
    led 3 0,0::C:0
    led 4 0,0::C:0
    led 5 0,0::C:0
    led 6 0,0::C:0
    led 7 0,0::C:0
    led 8 0,0::C:0
    led 9 0,0::C:0
    led 10 0,0::C:0
    led 11 0,0::C:0
    led 12 0,0::C:0
    led 13 0,0::C:0
    led 14 0,0::C:0
    led 15 0,0::C:0
    led 16 0,0::C:0
    led 17 0,0::C:0
    led 18 0,0::C:0
    led 19 0,0::C:0
    led 20 0,0::C:0
    led 21 0,0::C:0
    led 22 0,0::C:0
    led 23 0,0::C:0
    led 24 0,0::C:0
    led 25 0,0::C:0
    led 26 0,0::C:0
    led 27 0,0::C:0
    led 28 0,0::C:0
    led 29 0,0::C:0
    led 30 0,0::C:0
    led 31 0,0::C:0
    color 0 0,0,0
    color 1 0,255,255
    color 2 0,0,255
    color 3 30,0,255
    color 4 60,0,255
    color 5 90,0,255
    color 6 120,0,255
    color 7 150,0,255
    color 8 180,0,255
    color 9 210,0,255
    color 10 240,0,255
    color 11 270,0,255
    color 12 300,0,255
    color 13 330,0,255
    color 14 0,0,0
    color 15 0,0,0
    mode_color 0 0 1
    mode_color 0 1 11
    mode_color 0 2 2
    mode_color 0 3 13
    mode_color 0 4 10
    mode_color 0 5 3
    mode_color 1 0 5
    mode_color 1 1 11
    mode_color 1 2 3
    mode_color 1 3 13
    mode_color 1 4 10
    mode_color 1 5 3
    mode_color 2 0 10
    mode_color 2 1 11
    mode_color 2 2 4
    mode_color 2 3 13
    mode_color 2 4 10
    mode_color 2 5 3
    mode_color 3 0 8
    mode_color 3 1 11
    mode_color 3 2 4
    mode_color 3 3 13
    mode_color 3 4 10
    mode_color 3 5 3
    mode_color 4 0 7
    mode_color 4 1 11
    mode_color 4 2 3
    mode_color 4 3 13
    mode_color 4 4 10
    mode_color 4 5 3
    mode_color 5 0 9
    mode_color 5 1 11
    mode_color 5 2 2
    mode_color 5 3 13
    mode_color 5 4 10
    mode_color 5 5 3
    mode_color 6 0 6
    mode_color 6 1 10
    mode_color 6 2 1
    mode_color 6 3 0
    mode_color 6 4 0
    mode_color 6 5 2
    mode_color 6 6 3
    mode_color 6 7 6
    mode_color 6 8 0
    mode_color 6 9 0
    mode_color 6 10 0
    mode_color 7 0 3
    aux 0 0 1 1700 2100 0
    aux 1 1 0 900 1300 0
    aux 2 2 0 1300 1700 0
    aux 3 3 0 900 1300 0
    aux 4 13 0 1700 2100 0
    aux 5 0 0 900 900 0
    aux 6 0 0 900 900 0
    aux 7 0 0 900 900 0
    aux 8 0 0 900 900 0
    aux 9 0 0 900 900 0
    aux 10 0 0 900 900 0
    aux 11 0 0 900 900 0
    aux 12 0 0 900 900 0
    aux 13 0 0 900 900 0
    aux 14 0 0 900 900 0
    aux 15 0 0 900 900 0
    aux 16 0 0 900 900 0
    aux 17 0 0 900 900 0
    aux 18 0 0 900 900 0
    aux 19 0 0 900 900 0
    adjrange 0 0 0 900 900 0 0
    adjrange 1 0 0 900 900 0 0
    adjrange 2 0 0 900 900 0 0
    adjrange 3 0 0 900 900 0 0
    adjrange 4 0 0 900 900 0 0
    adjrange 5 0 0 900 900 0 0
    adjrange 6 0 0 900 900 0 0
    adjrange 7 0 0 900 900 0 0
    adjrange 8 0 0 900 900 0 0
    adjrange 9 0 0 900 900 0 0
    adjrange 10 0 0 900 900 0 0
    adjrange 11 0 0 900 900 0 0
    adjrange 12 0 0 900 900 0 0
    adjrange 13 0 0 900 900 0 0
    adjrange 14 0 0 900 900 0 0
    rxrange 0 1000 2000
    rxrange 1 1000 2000
    rxrange 2 1000 2000
    rxrange 3 1000 2000
    vtx 0 0 0 0 900 900
    vtx 1 0 0 0 900 900
    vtx 2 0 0 0 900 900
    vtx 3 0 0 0 900 900
    vtx 4 0 0 0 900 900
    vtx 5 0 0 0 900 900
    vtx 6 0 0 0 900 900
    vtx 7 0 0 0 900 900
    vtx 8 0 0 0 900 900
    vtx 9 0 0 0 900 900
    rxfail 0 a
    rxfail 1 a
    rxfail 2 a
    rxfail 3 a
    rxfail 4 s 2150
    rxfail 5 s 1000
    rxfail 6 h
    rxfail 7 h
    rxfail 8 h
    rxfail 9 h
    rxfail 10 h
    rxfail 11 h
    rxfail 12 h
    rxfail 13 h
    rxfail 14 h
    rxfail 15 h
    rxfail 16 h
    rxfail 17 h
    set align_gyro = DEFAULT
    set gyro_lpf = OFF
    set gyro_sync_denom = 4
    set gyro_lowpass_type = PT1
    set gyro_lowpass_hz = 90
    set gyro_notch1_hz = 400
    set gyro_notch1_cutoff = 300
    set gyro_notch2_hz = 200
    set gyro_notch2_cutoff = 100
    set gyro_stage2_lowpass_hz = 0
    set moron_threshold = 48
    set gyro_offset_yaw = 0
    set gyro_overflow_detect = ALL
    set align_acc = DEFAULT
    set acc_hardware = AUTO
    set acc_lpf_hz = 10
    set acc_trim_pitch = 0
    set acc_trim_roll = 0
    set align_mag = DEFAULT
    set mag_bustype = I2C
    set mag_i2c_device = 1
    set mag_i2c_address = 0
    set mag_spi_device = 0
    set mag_hardware = NONE
    set mag_declination = 0
    set magzero_x = -76
    set magzero_y = 137
    set magzero_z = 58
    set baro_bustype = I2C
    set baro_spi_device = 0
    set baro_i2c_device = 1
    set baro_i2c_address = 0
    set baro_hardware = AUTO
    set baro_tab_size = 21
    set baro_noise_lpf = 600
    set baro_cf_vel = 985
    set baro_cf_alt = 965
    set mid_rc = 1500
    set min_check = 1050
    set max_check = 1900
    set rssi_channel = 0
    set rssi_scale = 41
    set rssi_invert = OFF
    set rc_interp = AUTO
    set rc_interp_ch = RP
    set rc_interp_int = 19
    set fpv_mix_degrees = 0
    set max_aux_channels = 14
    set serialrx_provider = IBUS
    set serialrx_inverted = OFF
    set spektrum_sat_bind = 0
    set spektrum_sat_bind_autoreset = ON
    set airmode_start_throttle_percent = 32
    set rx_min_usec = 875
    set rx_max_usec = 2115
    set serialrx_halfduplex = OFF
    set input_filtering_mode = OFF
    set blackbox_p_ratio = 32
    set blackbox_device = SPIFLASH
    set blackbox_record_acc = ON
    set blackbox_mode = NORMAL
    set min_throttle = 1070
    set max_throttle = 2000
    set min_command = 1000
    set dshot_idle_value = 450
    set dshot_burst = OFF
    set use_unsynced_pwm = OFF
    set motor_pwm_protocol = ONESHOT125
    set motor_pwm_rate = 16000
    set motor_pwm_inversion = OFF
    set thr_corr_value = 0
    set thr_corr_angle = 800
    set failsafe_delay = 15
    set failsafe_off_delay = 10
    set failsafe_throttle = 1000
    set failsafe_kill_switch = OFF
    set failsafe_throttle_low_delay = 24
    set failsafe_procedure = DROP
    set align_board_roll = 0
    set align_board_pitch = 0
    set align_board_yaw = -90
    set gimbal_mode = NORMAL
    set bat_capacity = 0
    set vbat_max_cell_voltage = 43
    set vbat_full_cell_voltage = 41
    set vbat_min_cell_voltage = 33
    set vbat_warning_cell_voltage = 35
    set vbat_hysteresis = 1
    set current_meter = ADC
    set battery_meter = ADC
    set vbat_detect_cell_voltage = 30
    set use_vbat_alerts = ON
    set use_cbat_alerts = OFF
    set cbat_alert_percent = 10
    set vbat_cutoff_percent = 100
    set vbat_scale = 110
    set vbat_divider = 10
    set vbat_multiplier = 1
    set ibata_scale = 400
    set ibata_offset = 0
    set ibatv_scale = 0
    set ibatv_offset = 0
    set beeper_inversion = ON
    set beeper_od = OFF
    set beeper_frequency = 0
    set beeper_dshot_beacon_tone = 0
    set yaw_motors_reversed = OFF
    set 3d_deadband_low = 1406
    set 3d_deadband_high = 1514
    set 3d_neutral = 1460
    set 3d_deadband_throttle = 50
    set 3d_switched_mode = OFF
    set servo_center_pulse = 1500
    set servo_pwm_rate = 50
    set servo_lowpass_hz = 0
    set tri_unarmed_servo = ON
    set channel_forwarding_start = 4
    set reboot_character = 82
    set serial_update_rate_hz = 100
    set accxy_deadband = 40
    set accz_deadband = 40
    set acc_unarmedcal = ON
    set imu_dcm_kp = 2500
    set imu_dcm_ki = 0
    set small_angle = 25
    set auto_disarm_delay = 5
    set gyro_cal_on_first_arm = OFF
    set deadband = 0
    set yaw_deadband = 0
    set yaw_control_reversed = OFF
    set pid_process_denom = 2
    set runaway_takeoff_prevention = ON
    set runaway_takeoff_deactivate_delay = 500
    set runaway_takeoff_deactivate_throttle_percent = 25
    set tlm_switch = OFF
    set tlm_inverted = OFF
    set tlm_halfduplex = ON
    set frsky_vfas_precision = 0
    set hott_alarm_int = 5
    set pid_in_tlm = OFF
    set report_cell_voltage = OFF
    set ledstrip_visual_beeper = OFF
    set osd_units = METRIC
    set osd_warnings = -1
    set osd_rssi_alarm = 20
    set osd_cap_alarm = 2200
    set osd_alt_alarm = 100
    set osd_ah_max_pit = 20
    set osd_ah_max_rol = 40
    set osd_tim1 = 2560
    set osd_tim2 = 2561
    set osd_vbat_pos = 234
    set osd_rssi_pos = 472
    set osd_tim_1_pos = 234
    set osd_tim_2_pos = 234
    set osd_remaining_time_estimate_pos = 234
    set osd_flymode_pos = 234
    set osd_throttle_pos = 234
    set osd_vtx_channel_pos = 234
    set osd_crosshairs_pos = 234
    set osd_ah_sbar_pos = 234
    set osd_ah_pos = 234
    set osd_current_pos = 234
    set osd_mah_drawn_pos = 234
    set osd_craft_name_pos = 234
    set osd_gps_speed_pos = 234
    set osd_gps_lon_pos = 234
    set osd_gps_lat_pos = 234
    set osd_gps_sats_pos = 234
    set osd_home_dir_pos = 234
    set osd_home_dist_pos = 234
    set osd_compass_bar_pos = 234
    set osd_altitude_pos = 35
    set osd_pid_roll_pos = 234
    set osd_pid_pitch_pos = 234
    set osd_pid_yaw_pos = 234
    set osd_debug_pos = 234
    set osd_power_pos = 234
    set osd_pidrate_profile_pos = 234
    set osd_warnings_pos = 2506
    set osd_avg_cell_voltage_pos = 451
    set osd_pit_ang_pos = 234
    set osd_rol_ang_pos = 234
    set osd_battery_usage_pos = 234
    set osd_disarmed_pos = 234
    set osd_nheading_pos = 234
    set osd_nvario_pos = 234
    set osd_esc_tmp_pos = 234
    set osd_esc_rpm_pos = 234
    set osd_rtc_date_time_pos = 234
    set osd_adjustment_range_pos = 234
    set osd_core_temp_pos = 234
    set osd_stat_max_spd = ON
    set osd_stat_max_dist = OFF
    set osd_stat_min_batt = ON
    set osd_stat_min_rssi = ON
    set osd_stat_max_curr = ON
    set osd_stat_used_mah = ON
    set osd_stat_max_alt = OFF
    set osd_stat_bbox = ON
    set osd_stat_endbatt = OFF
    set osd_stat_bb_no = ON
    set osd_stat_rtc_date_time = OFF
    set osd_stat_tim_1 = OFF
    set osd_stat_tim_2 = ON
    set task_statistics = ON
    set debug_mode = NONE
    set rate_6pos_switch = OFF
    set pwr_on_arm_grace = 5
    set vtx_band = 4
    set vtx_channel = 1
    set vtx_power = 1
    set vtx_low_power_disarm = OFF
    set vtx_freq = 5740
    set vtx_pit_mode_freq = 0
    set vtx_halfduplex = ON
    set displayport_msp_col_adjust = 0
    set displayport_msp_row_adjust = 0
    set esc_sensor_halfduplex = OFF
    set led_inversion = 0
    set camera_control_mode = HARDWARE_PWM
    set camera_control_ref_voltage = 330
    set camera_control_key_delay = 180
    set camera_control_internal_resistance = 470
    set rangefinder_hardware = NONE
    set pinio_config = 1,1,1,1
    set pinio_box = 255,255,255,255
    profile 0

    set dterm_lowpass_type = BIQUAD
    set dterm_lowpass = 100
    set dterm_notch_hz = 260
    set dterm_notch_cutoff = 160
    set vbat_pid_gain = OFF
    set pid_at_min_throttle = ON
    set anti_gravity_threshold = 350
    set anti_gravity_gain = 1000
    set setpoint_relax_ratio = 100
    set dterm_setpoint_weight = 0
    set acc_limit_yaw = 100
    set acc_limit = 0
    set crash_dthreshold = 50
    set crash_gthreshold = 400
    set crash_setpoint_threshold = 350
    set crash_time = 500
    set crash_delay = 0
    set crash_recovery_angle = 10
    set crash_recovery_rate = 100
    set crash_limit_yaw = 200
    set crash_recovery = OFF
    set iterm_windup = 50
    set iterm_limit = 150
    set pidsum_limit = 500
    set pidsum_limit_yaw = 400
    set yaw_lowpass = 0
    set p_pitch = 58
    set i_pitch = 50
    set d_pitch = 35
    set p_roll = 40
    set i_roll = 40
    set d_roll = 30
    set p_yaw = 70
    set i_yaw = 45
    set d_yaw = 20
    set p_level = 50
    set i_level = 50
    set d_level = 75
    set level_limit = 55
    set horizon_tilt_effect = 75
    set horizon_tilt_expert_mode = OFF
    rateprofile 0

    set thr_mid = 50
    set thr_expo = 0
    set rates_type = BETAFLIGHT
    set roll_rc_rate = 100
    set pitch_rc_rate = 100
    set yaw_rc_rate = 100
    set roll_expo = 0
    set pitch_expo = 0
    set yaw_expo = 0
    set roll_srate = 90
    set pitch_srate = 90
    set yaw_srate = 90
    set tpa_rate = 10
    set tpa_breakpoint = 1650

    #
    Lo he echo bien?
    y ahora que miro y que hago?

  8. #8
    Avatar de starcopter
    Fecha de ingreso
    28 jul, 12
    Ubicación
    Barcelona
    Mensajes
    9,628
    Resource Baro None y Resource Compass None indican que el procesador no tiene asignada salida conectada a barómetro o brújula.

    Sí la controladora sí que lo lleva, entonces parece que se le ha cargado el firmware de la versión SIN barómetro.

    Estás seguro de que el Firmware es correcto?

    Saludos!

  9. #9
    Nuevo Usuario
    Fecha de ingreso
    04 jun, 18
    Ubicación
    Berga
    Mensajes
    16
    Creo que no, despues a la noche cuando terminevde trabajar lo miro y te digo coma ha ido.
    Gràcies y saludos

  10. #10
    Nuevo Usuario
    Fecha de ingreso
    04 jun, 18
    Ubicación
    Berga
    Mensajes
    16
    Hola de nuevo, la fc que tengo es esta https://eu.banggood.com/Wholesale-Wa...?rmmds=myorder
    La mia es la DOF DELUXE 10
    Que Fimware cargo?
    Salu2 y gracias

Permisos de publicación

  • No puedes crear nuevos temas
  • No puedes responder temas
  • No puedes subir archivos adjuntos
  • No puedes editar tus mensajes
  •